Machine Tool Coolers for EDM, Hydraulic Systems, Hydrostatic bearings, Plasma Cutting
In-Line Coolers
Pump fluids through the in-line cooler.
OC Models for Water or Water-Based Coolants including de-ionized water, water/glycol mixtures, and water-based synthetic coolants. Evaporators are brazed stainless steel plates rated for 350 PSI working pressure. Piping and fittings are non-ferrous. A Low Flow switch automatically shuts down refrigeration on loss of coolant flow. Coolant passing through cooler must be clean, otherwise specify optional In-Line Filter (ILF) or Cleanable Evaporator (CEV).
OCO Models for Oil or Oil-Based Coolants. Evaporators are brazed, enhanced stainless steel plates rated for 350 PSI working pressure. Piping and fittings are copper, bronze, steel or hose. A Low Flow switch automatically shuts down refrigeration on loss of oil flow.
Applications
- Coolant Systems
- Filtration Systems
- Hydraulic Systems
- EDM
- Cold Spray
- Batch Cooling
- Film Developing
- Ingredient Water
- Food Processing
Open-Loop Coolers
Recirculate fluid from a remote tank.
OC Models for Water or Water-Based Coolants including de-ionized water, water/glycol mixtures, and water-based synthetic coolants. Evaporators are brazed, stainless steel plates. Piping and fittings are non-ferrous. Self-priming, bronze, centrifugal pumps are standard. Coolant recirculating through the cooler must be clean, otherwise specify optional In-Line Filter (-ILF) or Cleanable Evaporator (-CEV).
OCO Models for Oil or Oil-Based Coolants. Evaporators are brazed, enhanced stainless steel plates. Piping and fittings are copper, bronze, steel, or hose. Self-priming, cast-iron gear pumps are standard. Oil recirculating through the cooler must be clean, otherwise specify optional In-Line Filter (-ILF) or Cleanable Heat Exchanger (-CHX).
Applications
- Coolant Sumps
- Filtration Tanks
- Hydraulic Tanks
- EDM
- Process Tanks
- Quench Tanks
- Headstocks
- Gear Boxes
- Fish Tanks
Call 519-671-3911, or click haviland@precisionspindleinc.com or Contact Us in the footer below or the header above for more information!
