Standard Frequency Spindles

Our spindle manufacturer offers Standard Frequency Spindles used in the automotive, aerospace, military, tooling, wood, plastic, stone, marble and glass industries.

A Standard Frequency (SFE) Spindle of 2-pole motor construction runs at 3600 RPM when supplied 60 Hz power. They can be adapted to run anywhere up to 7200 RPM by driving them with an optional frequency inverter.

Selectiing a Standard Frequency Spindle

All SFE Series spindles are sealed lubrication, requiring no additional lubrication, and can be customized in both diameter and length to fit your specific application.
high_frequency_spindles

Spindle Type Power RPM “D” Dia. “B” Length “C” Length M.L. M.D. Cooling Type
SFE-76-12 1.5HP – (1.1KW) 3600 3″ – (76.2 mm) 12.8″ – (325.1 mm) 2.06″ – (52.3 mm) 11″ – (279.4mm) 5.5″ – (140mm) TENV
SFE-76-14 1.5HP – (1.1KW) 3600 3″ – (76.2 mm) 14″ (355.6 mm) 2.06″ – (52.3 mm) 11″ – (279.4mm) 5.5″ – (140mm) TENV
SFE-76-16 1.5HP – (1.1KW) 3600 3″ – (76.2 mm) 16″ – (406.4 mm) 2.06″ – (52.3 mm) 11″ – (279.4mm) 5.5″ – (140mm) TENV
SFE-76-12 3HP – (2.2KW) 3600 3″ – (76.2 mm) 12.8″ – (325.1 mm) 2.06″ – (52.3 mm) 12.75″ – (323.8mm) 6.25″ – (158mm) TENV
SFE-76-14 3HP – (2.2KW) 3600 3″ – (76.2 mm) 14″ – (355.6 mm) 2.06″ – (52.3 mm) 12.75″ – (323.8mm) 6.25″ – (158mm) TENV
SFE-76-16 3HP – (2.2KW) 3600 3″ – (76.2 mm) 16″ – (406.4 mm) 2.06″ – (52.3 mm) 12.75″ – (323.8mm) 6.25″ – (158mm) TENV
SFE-79.4-16 5HP – (3.7KW) 3600 3.125″ – (79.4 mm) 16″ – (406.4 mm) 3.12″ – (79.2 mm) 14″ – (355.6mm) 7.75″ – (196.9mm) TEFC
SFE-100-15.75 5HP – (3.7KW) 1800 3.937″ – (100 mm) 15.75″ – (400 mm) 3.12″ – (79.2 mm) 14″ – (355.6mm) 7.75″ – (196.9mm) TEFC
SFE-100-15.75 5HP – (3.7KW) 3600 3.937″ – (100 mm) 15.75″ – (400 mm) 3.12″ – (79.2 mm) 14″ – (355.6mm) 7.75″ – (196.9mm) TEFC
SFE-101.6- 15.75 5HP – (3.7KW) 3600 4″ – (101.6 mm) 15.75″ – (400 mm) 3.12″ – (79.2 mm) 14″ – (355.6mm) 7.75″ – (196.9mm) TEFC
SFE-120 7.5HP – (5.6KW) 1800 4.72″ – (120 mm) 15.75″ – (400 mm) 3.75″ – (95.3 mm) 15″ – (381mm) 9.5″ – (241.3mm) TEFC

Spindle Nose Configurations

nose_configurations